32-bit DDR4 SDRAM for Xilinx Virtex-7 FPGA development board
Why is it said that the Xilinx Virtex-7 FPGA series has broken the previous physical limit? Because the combination of Virtex-7 ultra-high-end bandwidth and capacity can improve system performance to meet the most complex system requirements. Uncompromising performance is the foundation of a programmable platform, and its versatility can be differentiated to the greatest extent in today's competitive market.
Virtex-7 FPGAs have up to 96 advanced serial transceivers, enabling designers to build breakthrough bandwidths into next-generation communication solutions. Virtex-7 FPGAs can provide up to 2 million logic units and a throughput exceeding 5TMACS DSPs. These resources support massively parallel data processing architectures that perform more work in each clock cycle. With up to 88 advanced serial transceivers, Virtex-7 FPGAs provide a serial bandwidth of more than 4Tbps. These functions make the processing performance of advanced radar, high-performance computing, and advanced medical imaging systems to reach a new level.
Xilinx Virtex-7 FPGA Development Board
Although modern FPGAs contain internal memory, the amount of available memory is always several orders of magnitude lower than that of dedicated memory chips. Therefore, it is not uncommon for many FPGA designers to add some type of memory to the FPGA. Due to its high speed and low cost, SDRAM is a very popular memory. As memory manufacturers tried to find ways to increase the speed of SDRAM, DDR SDRAM was introduced. DDR stands for "Double Data Rate". They are not as easy to control as static memories, so SDRAM controllers are often used.
UMI UD408G5S1AF 256Mx32 8Gb 32-bit DDR4 SDRAM is currently a memory suitable for use in the Virtex-7 FPGA development board. Its data rate: 3200Mbps / 2933Mbps / 2666Mbps / 2400Mbps / 2133Mbps / 1866Mbps / 1600Mbps. Automatic pre-charge option for every burst access. Perform automatic refresh. Each DRAM can set different mode register values and can be adjusted individually. It has the largest power saving mode, the lowest power consumption, and no internal refresh is required. Yingshang Microelectronics agents can provide samples and tests, and provide technical support.
The industry-leading 28nm HPL process technology achieves the best balance of performance and power consumption for these next-generation FPGAs. Architectural improvements have further reduced I/O power consumption while increasing bandwidth. The intelligent clock gating algorithm in Xilinx Design Tools software further reduces active power consumption.
Xilinx Virtex-7 FPGA price
The official price of the Xilinx Virtex-7 FPGA VC707 evaluation kit is $3,495.
The Virtex-7 FPGA VC707 evaluation kit is a fully functional and highly flexible high-speed serial basic platform, using Virtex-7 XC7VX485T-2FFG1761C; the platform includes hardware, design tools, basic components of the IP core, and high-performance, serial Pre-verified reference design for system design with row connection function and advanced storage interface. A pre-verified reference design and industry-standard FPGA mezzanine connector (FMC) are provided with the kit, which can be upgraded and customized using daughter cards.
Xilinx Virtex-7 FPGA Evaluation Kit
Xilinx Virtex-7 FPGA main performance and advantages
Use Virtex-7 VX485T FPGA to realize a 40Gb/s connection function platform for high bandwidth and high-performance applications
Hardware, design tools, IP, and pre-verified reference designs
Support embedded processing including MicroBlaze and soft 32bit RISC
Realize the serial connection of PCIe Gen2x8, SFP+ and SMA pair, UART, IIC
Advanced storage interface with 1GB DDR3 SODIM storage (up to 800MHz / 1600Mbps)
Development of network applications using 10-100-1000 Mbps Ethernet (GMII, RGMII, and SGMII)
Expansion I/O, including FPGA Mezzanine Card (FMC) interface